Faux Painting Techniques
- The Internet's best
destination for faux painting information and resources.
Site Navigation:
Main Pages:
Specific Finishes:
Stone:
Painted Effects:
Metals:
Stenciling:
General Information:
Surfaces:
Website Features:
Other useful sites:
Spattering
Spattering is a very simple and straightforward technique, but the results
can be fantastic. If completed correctly, for example, spattering with a
variety of gray, black and white paints, it can add depth to any painted
object. By adding a brown over the surface, the overall effect can even be
made to look like granite.
Want to Learn some great Faux Painting Techniques?
Our Learning Faux downloadable e-book (fully printable), has been written with one primary goal in mind. To introduce the novice faux painter to the most popular faux painting finishes.
Although this effect can be created on walls, it is very messy to execute.
As a result, it is more often completed on smaller objects, like furniture
and other household items.
Try experimenting with different color combinations on a small area prior to working with the desired surface. This will allow you to test out various colors and effects. Remember that the final size of the spattering dots depends on how close the brush is to the surface and how much paint is on the brush.
To take the spatter
effects to a higher level, consider using a spray gun. This is usually
considered the easiest way to achieve highly effective spatter or splash
effects. It enables far greater precision and control than does a brush. Use
very low air pressure to avoid atomization. Rapid manipulation of the spray
gun renders series' of irregular lines. Varying pressure on the trigger of
the gun will create small globes or spots of paint.
Most types of spray guns can be used in the creation of a spattered effect. The variety of effects that can be created is literally unlimited. For line effects, thick viscous colors of the consistency of treacle should be employed, thick enamels or bronze powders in thick cellulose solutions being particularly effective. The control is remarkably flexible and lines thinner than the finest hair can be obtained with ease. By using thick stucco paste, attractive raised effects can be produced.
In our project, we started with an eggshell latex primer, applied two coats, then allowed the primer to dry overnight. With the undercoat completely dry, we used 5 different primary colors. You can use whatever colors you want. Often, colors chosen from furniture and fabrics in close proximity to the surface are a good place to start.
5 Color Spattering Effect: Light gray, medium gray, white, black
)
)
Dip your brush in the first color, in this case black, then hit the stick, aiming at the area you want to cover with spatters.
Wash the brush before moving to the second color, then repeat the process using the second color, in this case gray.
)
)
Repeat the process again using the third color, in this case, white. There is no need to wait until the paint is dry before moving to the next color.
Spattering can create a range of effects. The door on the left has been given a metallic paint finish, enhanced using the spattering effect.
To summarize:
Spattering is an easy finish to create and demands no prior experience. Spattering can even create interesting marble-like finishes. One needs to be careful not to overdo the effect with too much paint. Use small amounts of paint covering only the first inch of bristles of your brush. Tap the brush with varying degrees of strength to release the paint droplets in various sizes. This is a finish that is suited well to furniture and other household items, such as lampshades, bookcases and others. Always find a surface on which to experiment before moving to the final surface.
Related Articles:
Copyright 2003-2006 Faux Painting Techniques.com All Rights Reserved. Images remain property of their respective owners.